RGBLink CP 3096 Quick Start - Manual (Page 15)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
14
How to Set the Position of Image
1. Push [POSITION] button in function area to enter the position adjustment function menus.
2. Turn the knob, choose H POS or V POS, and set to default values, (the default value can
also be set via the number button), after setting, push the knob to confirm.
3. If the operation is wrong,
turn the knob to adjust again, or choose “RESET” in [POSITION] for
recover system default, and reset the above items.
How to Set up the PIP
Push the [PIP] button in Effects Operation Area, and enter the PIP function menu. Choose [PIP] option,
turn the knob, and choose ON to enable the PIP function.
LAYOUT: There are 3 kinds of PIP layouts, the corresponding results are as follows:
PIP L+T PBP L+R PBP T+B
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the main and
sub-picture exchange.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B individually.