D. optional module installation and, Replacement instruction, Optional module installation and replacement – RGBLink VENUS X2 User Manual User Manual

Page 65: Instruction

VENUS X2 User Manual 65

VENUS X2 and VENUS X3 support replaceable input and output optional modules, user

can install or replace the optional module according to actual need. The installation steps

of VENUS X2 and VENUS X3 are the same. Here we take VENUS X3 for example,

specific steps are as follows:

Install the Optional Module

1. Unscrew the 2 captive screws in input modules block, and pull out the input module

block, as shown in figure:

2. Install the input module:

①

For the whole PCB input module with DVI or HDMI interface, fix the input module on

the plate with 2 M3*4 flat screws, also need to install the 2G Micro SD card.

Captive Screw