RGBLink VENUS X2 User Manual - Manual (Page 45)

5. Communication Software Guideline
Software Operation
VENUS X2 User Manual 45
Paste Layer: Put the mouse on the window to be copied, right click the mouse,
select ―Copy Layer‖, then right click in output screen zone of controlling
software, and select ―paste Layer‖.
Adjust Window: Two ways can change the size and location of the opened
window:
a. Drag and drop the opened window by mouse. The details are: move the
mouse to the lower right brink of the opened window, when the mouse
shows‖<—>‖, press the left key of the mouse and drag the window to a suitable
size and then release the mouse. Move the mouse to the opened window and
press the left key of the mouse and move the mouse, then the window will be
moved, release the mouse when moved to the suitable location. But this
method can only adjust the size and location roughly; if an accurate adjustment
is needed, the second method can be used.
b. Put the mouse on the window to be adjusted, right click the mouse. Select the
―Property‖ and the exemplary interface will appear, adjust precisely by ―X‖, ―Y‖,
Width‖ and ―Height’.
Full or Close Window: Click the icon ― ‖ at the upper right corner to full cell
and click the icon ― ‖ at the upper right corner to full screen. Or put the mouse
on the window to be adjusted, right click the mouse, select the ―Full Cell‖ or ―Full
Scr een‖.
When a window needs to be closed, click the icon ― ‖ at the upper right
corner, or put the mouse on the window to be closed, right click the mouse,