RGBLink VENUS X3 Quick Start - Manual (Page 17)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
16
: The link mode can achieve 5 pictures to 5 pictures seamless switching. It needs
to connect output 6 and output 8 to the corresponding DVI inputs with two DVI cables, system
default input 1 and input 2, then choose “port 6” Loop To “Input 1”, “port 8” Loop To “Input 2”
in the screen params window of the windows control program.
Basic Operation
Windows Setting
New Window: In output screen zone of controlling software, press the left mouse key and
drag on the intended output screen to cover the whole current screen. And the below
interface will be displayed. A window can be opened by click the shortcut key of “New
Window”
, or double click the left signal source to be shown on the window.
Paste Layer: Put the mouse on the window to be copied, right click the mouse, select
“Copy Layer”, then right click in output screen zone of controlling software, and select
“paste Layer”.
Adjust Window: Two ways can change the size and location of the opened window: