RGBLink VENUS X3 Quick Start - Manual (Page 16)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
15
Input Source: Choose input source HDMI or BNC.
Vertical spliting (one in two out): It is mainly for doing vertical split with dual graphics cards
computer.
Quick Split Set: Set the split H total, split V total, row and column, the output screen support
max 2 rows and 4 columns, user can set the width and height of the output screen.
Link Mode: The link mode can achieve 5 pictures to 5 pictures seamless switching. It needs
to connect output 6 and output 8 to the corresponding DVI inputs with two DVI cables, system
default input 1 and input 2, then choose “port 6” Loop To “Input 1”, “port 8” Loop To “Input 2”
in the screen params window of the windows control program.
Advance Split Setup: Choose the port, and set X, Y, Width, Height and Rotate.
Operating Mode
: Output the signal to LED display.
: Output the signal to the monitor, click “Take” or “Cut” in “Take” box to
seamless switch the signal to LED display. If sele ct “Take Out” or “Black”, the
preview image will seamless switch or black to LED display instantaneously.
System default outputs 2.4.6.8 as preview channel and outputs1.3.5.7 as
program channel.