Research Concepts RC1500 - Manual (Page 30)

Track Menus
RC1500B Quick Start Guide 30
POS SS
CLEAR TRACK: 0
0- NO,1-YES MNU
MODE
CLEAR TRACK select 0 or 1: Press 1 to clear the track table entries or press 0
to not modify the existing data.
POS SS
RESET UPDATE:0
0- NO,1-YES MNU
MODE
RESET UPDATE select 0 or 1: Press 1 to clear the UPDATE flags for the track
data or press 0 to not modify the existing data.
POS SS
FORCE UPDATE:0
0-NO,1-YES MNU
MODE
FORCE UPDATE select 0 or 1: Press 1 to set UPDATE flags or press 0 to not
modify the existing data. (Opposite function of RESET UPDATE)
POS SS
STEP SIZE: 3
0-99 POS CNT
MNU
MODE
STEP SIZE select 0-99 counts: The number of pulse counts that are moved
when the controller makes a step. Too large of a step size can result in
overshooting the satellite.
REPEAK, SEARCH, or ALIGN
Hitting the 3 key followed by the ENTER key at the main MENU display will
initiate some action by the controller. The action taken depends on the TRACK
sub-mode which is active. The below table describes the action taken for each of
the track sub-modes.