Rena L-350 - Manual (Page 4)

-2-
ASSEMBLING THE L-350
1. Remove all packing and parts supplied. Check and identify all parts with the ones
listed below.
• [A] Envelope Guide
90-102-05
• [B] Stack Rest
90-102-10
• [C] Media Support
90-102-13
• [*] Media Support Long (x2)
???
• [D] Thumbscrews
90-109-07
• [E] Tray Assembly
90-104-03
• [*] Power Cord
123-635
• [*] TR-10 Reel Assembly
• [*] Right Media Side Guide 90-103-02B
* = not shown
2. Mount envelope guide [Figure1A] to side guide block using 2 screws [Figure 1B].
3. Mount media stack rest [Figure 1C] to the machine using thumbscrew {Figure 1D].
4. Mount label stack tray [Figure 1E] on cross rods [Figure 1F]. The assembly snaps
into place.
5. Plug power cord into socket on the back of the machine. Plug other end into 115 VAC
GROUNDED outlet.
Figure 1