Remotec ZTS-110 V3.05 - Manual (Page 9)

15 16
Note: Explanations of Swing and Differential set point
HEAT mode: thermostat controls the temperature according to the following
diagram
o o o Example for Heating: (Set point = 70 F, Swing = 1 F, Differential = 2 F)
o o => 1st stage heater turns on when room temp is 69 F and off at 71 F.
o o => 2nd stage heater turns on when room temp is 67 F and off at 70 F.
LCD indication Step Procedure / Description
Press "Prog" key once to confirm the setting
and it will go to Advanced Recovery setting.
Press Up/Down key to enable/disable
Advanced Recovery Mode.
9
Press "Prog" key once to confirm the setting
and it will go to the Home page.
10
RECOVERY
RECOVERY
WAKE
AM
MO
FAN AUTO
PROG ON OFF
Diff Swing
SD= switch differential
Swing
Temperature
Output
Off
Heat
st 1 Turn off
nd 2 Turn off
Set point
st 1 Turn on
nd 2 Turn on
COOL Mode: thermostat controls the temperature according to the following
diagram
o o Example for Cooling: (Set point = 80 F, Swing = 1 F)
o o => Cooler turns on when room temp is 81 F and off at 79 F.
AUTO: thermostat controls the temperature according to the following
diagram
o o There is a dead band 4 F/2 C between heat set point and cool set point.
o Example 1: If user select heat set point is 70 F, the minimum cool set point will be
o o limited at "heat set point" + 4 F: 74 F
o o Pervious heat set point is 70 F and cool set point is 74 F
o Example 2: If user changes heat set point to 72 F, cool set point will be updated to
o 76 F automatically to maintain the dead band.
Swing
Temperature
Output
Off
Cool
Turn off
Set point
Turn on
Temperature
Output
Off
Heat
st 1 Turn off
nd 2 Turn off
Heat Set point
st 1 Turn on
nd 2 Turn on
Diff Swing Swing Dead band
Cool Set point