Remotec ZTS-110 V3.05 - Manual (Page 20)

37 38
Technical Specifications
Model no.
BW8031US (ZTS-110US)
BW8031AU (ZTS-110AU)
BW8031EU (ZTS-110EU)
RF frequency
908.4MHz (US) (ZTS-110US)
921.4MHz (AU) (ZTS-110AU)
868.4MHz (EU) (ZTS-110EU)
RF operating
distance
Up to 100ft outdoor line of sight, in unobstructed environment
Z-Wave
association group
Supports 3 association groups, max. 5 nodes ID can be
assigned to these association groups.
LCD TN type with white backlight
VA=66.5mmx28.5mm
Powered by Dry battery AA x 4pcs or
24 VAC +/- 20% 50/60Hz
Relay contact Voltage: 24 VAC 50/60 Hz
Current: 1A Max. (inductive)
Temperature
measurable range o o 32 - 99 F / 0 - 40 C
Temperature display
resolution o o 0.5 F / 0.1 C
Temperature Setting
range o o 41 - 99 F / 5 - 37 C
Temperature
o o Operating: 32 - 122 F / 0 - 50 C
o o Storage: 23 - 140 F / -5 - 60 C
Dimension (L x H x T) 145mm x 100mm x 25mm
Weight 170g (Batteries excluded)
Checking Accessories
After opening the cover of the packaging box, check that the following accessories
are included.
- ZTS-110: Z-Thermostat - AA batteries x 4pcs (optional)
- Screw + Wall Anchor x 4pcs - User Manual
- RC/RH jumper wire x 1pc - Warranty sheet
Z-Wave device type
Basic Device Class: Routing_Slave
Generic Device Class: Thermostat
Specific Device Class: Thermostat general v2
Z-Wave Command Class Controlled Supported
COMMAND_CLASS_THERMOSTAT_FAN_MODE NO YES
COMMAND_CLASS_THERMOSTAT_FAN_STATE NO YES
COMMAND_CLASS_THERMOSTAT_MODE NO YES
COMMAND_CLASS_THERMOSTAT_SETPOINT NO YES
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE NO YES
COMMAND_CLASS_THERMOSTAT_SETBACK NO YES
COMMAND_CLASS_SENSOR_MULTILEVEL NO YES
COMMAND_CLASS_CLOCK NO YES
COMMAND_CLASS_BATTERY NO YES
COMMAND_CLASS_BASIC YES YES
COMMAND_CLASS_VERSION NO YES
COMMAND_CLASS_MANUFACTURER_SPECIFIC NO YES
COMMAND_CLASS_ASSOCIATION NO YES
COMMAND_CLASS_CONFIGURATION NO YES