REMKO EFS 35 - Manual (Page 7)

2 Technical data
2.1 Unit data
Series EFS 35
Operating data
Maximum permitted pressure, primary bar 3
Maximum permitted pressure, secondary bar 10
Operating temperature °C 2-95
Pipe connections
Primary circuit (tank circuit) Inches 1 1/2" Outside thread
Secondary circuit (domestic water circuit) Inches 1" Outside thread, flat-sealing
Equipment
Gravity brake mmWs 2 x 800
Primary pump
HE-Pumpe with
PWM control, 3-70 watts
Secondary pump
(optional) HE-pump
withPWM control, 5-63 watts
Heat exchanger 40 Plates
Medium flow rate probe(technical data see separate table)
FowSonic, measuring range:
1-80 l/min
Temperature probe Pt 1000, fast
Materials
Valves Brass
Seals: O-rings Klingersil/EPDM
Flat seals AFM 34, asbestos-free
Plate heat exchanger
Stainless steel 1.4400/solder:
99.99% Cu
Insulation EPP
Gravity brake Brass
Dimensions
Height (with insulation) mm 795
Width (with insulation) mm 602
Depth (with insulation) mm 298
Top axis-centre distance mm 120
Bottom axis-centre distance mm 100
7