REMKO HPS500 User Manual
Page 11
11
5. Insert the round section of insulation
on top of the tank and fix it in place
by pressing down lightly.
In order to achieve optimum heat
insulation, there must not be an air
gap between the round section and
the insulation.
!
CAUTION
6. Position the insulation cover and
attach it properly to the insulation
using the openings in the top of the
hooked strip.
7. Attach the supplied collars to the
connections.
If necessary, bend the clamping
tongues of the collar into the centre.
This ensures that the collars are
properly seated on the pipes and
sockets.
If fitting the collars later on, the
material must be cut through at
the predetermined breaking point
specified for the collars.