REMKO KPS300 - Manual (Page 4)

4
REMKO
KPS 300
Carefully read the operating manual
before placing the unit in service for
the first time. It contains useful tips
and notes
! such as hazard warnings
to prevent injury and material damage.
Failure to follow the directions in this
manual can result in endangerment
to persons, the environment and the
equipment itself and will void any claims
for liability.
■ Keep this manual in the vicinity of
the units.
■ The units and components should
be set up and installed only by
qualified personnel.
■ The set-up, connection, and operation
of the unit and its components
must take place in accordance with
the operating conditions stipulated
in this manual and comply with all
applicable local regulations.
■ Modification of units and components
supplied by REMKO is not permitted
and can cause malfunctions.
■ Units and components may not be
operated in areas where there is an
increased risk of damage. Observe
the minimum clearances.
Safety notes
■ The electrical supply is to be adapted
to the requirements of the units.
■ The operational safety of units and
components is only assured if they are
fully assembled and used as intended.
Safety devices may not be modified
or bypassed.
■ Do not operate units or components
with obvious defects or signs of
damage.
■ The units and components must
be kept an adequate distance from
flammable, explosive, combustible,
abrasive and dirty areas or
atmospheres.
■ Installation, repair and maintenance
work may be carried out only
by authorised specialists. Visual
inspections and cleaning can be
performed by the operator as long
as power is disconnected from the
equipment.
■ To preclude any danger from the unit,
take appropriate hazard-prevention
measures when performing
installation, repair or maintenance
work or cleaning the units.