REMKO Fresh Water Station - Manual (Page 8)

8
REMKO
FRESH WATER STATION
6. Put on the cover and screw
into place. Plug the mains plug
into a suitable Schuko socket.
Installation orientation of the flow switch
Orientation for installation:
When fitting the flow switch, ensure
that the hex nut
is pointing upwards,
like in the diagram.
Water must flow through the sensor
from the bottom to the top
, in the direc-
tion of the arrow.
The detector (black plastic part) can be
fitted to the brass part in any direction.
Note the orientation when install-
ing the flow switch
(cold water connection only from
underneath!)
NOTE
G 3/4” oder 1”
G 3/4” oder 1”
G 3/4“ or 1“
G 3/4“ or 1“
Nut