REMKO Flange Heating Cartridge - Manual (Page 8)

8
REMKO
FLANGE HEATING CARTRIDGE
REMKO
FLANGE HEATING CARTRIDGE
Here :
green = the plant is in order
red, flashing = fault (request assistance
from customer service).
The system will not work properly if
the container is not filled with water.
Do not damage or remove the current
discharge resistor protection during
maintenance.
The units and components are manufactured using state-of-the-art production
methods and tested several times to verify their correct function. If however
malfunctions should occur, please check the functions as detailed in the list below.
Please inform your dealer if the unit is still not working correctly after all function
checks have been performed!
Troubleshooting and customer service
Fault Possible cause Checks Remedial measures
Water in the storage
tank does not heat up
Circuit breaker
does not respond
Is the switch in the
distributor switched on? Switch back on
Fuse does not
respond
Is the fuse damaged? Install a new fuse
Temperature control
set incorrectly
Is the temperature
control set correctly?
Adjust the temperature
control to the desired
operating temperature
The installed anode protection must
be checked by a specialist no less than
every 2 operating years (at the latest
however if the material is 3/4 worn) and
this inspection must be documented.
If servicing tasks are performed, the
cleaning and servicing flange should be
opened, and the tank inspected for any
flooding or contamination.
The external current anode's function
must be monitored regularly using the
control lamp.