REMKO Flange Heating Cartridge - Manual (Page 5)

REMKO
FLANGE HEATING CARTRIDGE
5
REMKO
FLANGE HEATING CARTRIDGE
Description
The electric flange heating cartridges
are used as auxiliary heating in industrial
water storage tanks.
It comprises a high-quality tubular heating
element fitted insulated on a D 180 flange
plate.
They are intended for the pressure-tight
operation and heating of drinking and
heating water.
They require no maintenance or care and
are easy to operate.
The desired temperature is preselected
using a control knob. The heating
is switched on automatically by the
temperature controller and switched
off again when the desired water
temperature in the storage tank has been
reached. If the water temperature falls,
e.g. because water has been let out of
the storage tank or because of natural
cooling, the unit's heater switches back on
until the preselected water temperature in
the storage tank has been reached.
Warranty
The warranty conditions are listed in the
"General terms and conditions".
Please contact your direct contract
partner first.
Environmental
protection and recycling
Disposing of packaging
All products are packed for transport
in environmentally friendly materials.
You can make a valuable contribution
to reducing waste and sustaining raw
materials by only disposing of packaging
at approved collection points.
Disposing of the
components
The manufacturing process for the units
is subject to continuous quality control.
Only high-grade materials are used, the
majority of which are recyclable. You
can also contribute to environmental
protection by only disposing of
components in accordance with local
regulations and in an environmentally
safe manner, e.g. through authorised
disposal and recycling specialists or at
collection
points.
Intended
use
The electric flange heating cartridges
are used as auxiliary heating in industrial
water storage tanks and are designed
for the pressure-tight operation and
heating of drinking and heating water.
Another or additional use is considered
an unintended use. The manufacturer/
supplier assumes no liability for damages
arising from such use. The user bears the
sole risk in such cases.
Intended use also includes working
in accordance with the operating
manual and installation instructions
and complying with the maintenance
requirements.