REMKO Flange Heating Cartridge - Manual (Page 4)

4
REMKO
FLANGE HEATING CARTRIDGE
REMKO
FLANGE HEATING CARTRIDGE
Carefully read the operating manual
before commissioning the unit for the
first time. It contains useful tips and
notes such as hazard warnings to
prevent injury and material damage.
Failure to follow the directions in this
manual can result in endangerment
to persons, the environment and the
equipment itself and will void any claims
for liability.
■ Keep this manual in the vicinity of
the units.
■ The units and components may only
be set up and installed by qualified
personnel.
■ The set-up, connection, and operation
of the units and components must
be done in accordance with the
operating conditions stipulated in this
manual and comply with all applicable
local regulations.
■ Modification of units and components
supplied by REMKO is not permitted
and can cause malfunctions.
■ Units and components may not be
operated in areas where there is an
increased risk of damage. Observe
the minimum clearances.
Safety notes
■ The electrical power supply is to be
adapted to the requirements of the
units.
■ The operational safety of units and
components is only assured if they are
fully assembled and used as intended.
Safety devices may not be modified
or bypassed.
■ Do not operate units or components
if there are obvious defects or signs of
damage.
■ The units and components must
be kept at a safe distance from
flammable, explosive, combustible,
aggressive and dirty areas or
atmospheres.
■ Installation, repair and maintenance
work may be carried out only
by authorised specialists. Visual
inspections and cleaning can be
performed by the operator as long
as power is disconnected from the
equipment.
■ To preclude any danger to persons
from the unit, take appropriate
precautions when performing
installation, repair or maintenance
work or cleaning the units.