REMKO RWK 260 - Manual (Page 8)

8
FAN button The fan speed is selected with this button. You can select either low, medium, high or auto-
matic fan speed.
Functional process
FAN FAN FAN FAN
Fin button The air outlet fins are individually set with this button. You can select 5 positions and an os-
cillating function.
Functional process
Swing button The oscillating function of the air outlet fins is set with this button. This enables you to im-
mediately switch between a set position and the oscillating function. The swing function im-
proves the air distribution in the room.
Swing Swing Swing
Functional process
Sleep button With this button, a program is activated that increases the target temperature by 1°C after
one hour and 2°C after two hours when the unit is in cooling mode. In heating mode, the
target temperature is decreased by 1°C after one hour and by 2°C after two hours. The unit
automatically switches off after 8 hours.
Functional process
Sleep Sleep Sleep
Timer buttons The unit is programmed to automatically switch on or off with this button. By pressing the
timer on or off button, the timer is activated and the time display disappears. The timer
symbol for the timer on or off time blinks. The timer display of the indoor unit is lit. By press-
ing the HR. and MIN. buttons, the desired timer on or off time is set. Once the setting is
made, the timer symbol blinks for another 30 seconds.
If the program time is reached, the unit automatically switches on or off. If the indoor unit
automatically switches on, the last mode, temperature and fan speed setting is activated.
To disable the timer on or off function prior to its activation time, press the corresponding
timer button or the ON/OFF button.
Functional process
Timer On
Timer on 30 Sec. Programmed
time reached HR. / MIN.
Unit in
operation