Shutting down the unit, Customer service and guarantee, Environment and – REMKO RKV 13 C User Manual
Page 13: Recycling
13
G
When using water, the filter must first be com-
pletely air dried before it can be reinserted into the
unit.
5. Reinsert the filter carefully.
Make sure it is securely in place.
6. Close the air intake grille.
7. Switch the unit back on.
Shutting Down the Unit
Temporary shutdown
1. Switch all indoor units off using the remote control.
2. Disconnect the system with the main switch or fuse
protection from the power supply.
3. Check the indoor unit and outdoor part for visible
damage.
4. Clean the indoor unit and outdoor parts as described
in the “Maintenance and Service” section. Cover the
outdoor part if possible with a plastic cover to protect
it from weather conditions such as snow.
Permanent shutdown
For environmental safety reasons, the air conditioners
may only be deinstalled by authorised service centres.
REMKO GmbH & Co. KG or your contract partner would
be happy to provide you with the name of a service cen-
tre in your area.
2. Open the air intake grille
and pull the filter out.
3. Clean the filter using a
standard vacuum cleaner.
Rotate the dirty side to the
top.
4. Heavy dirt can be re-
moved carefully with
lukewarm water and a
mild cleaning agent.
Rotate the dirty side to
the bottom.
Customer Service and
Guarantee
For the guarantee to be valid, the purchaser or his cus-
tomer must completely fill out the "guarantee certificate"
enclosed with all units and send it back to REMKO GmbH
& Co. KG
.
The units are repeatedly tested at the production site to
ensure that they are working properly. If a malfunction
occurs that cannot be eliminated by the operating per-
sonnel, please contact your dealer or contract partner.
Operation/handling which does not comply with
these instructions is prohibited!
In cases of non-compliance, we assume no liability
and the guarantee becomes null and void.
G
Proper use
The manufacturer assumes no liability for damage re-
sulting from non-compliance with manufacturer specifi-
cations and legal requirements, or if modifications are
made to the units.
Only authorised personnel may come into contact with
the cold cycle. This ensures that refrigerant does not es-
cape into the environment when the unit is being re-
paired.
Both the refrigerant and the system parts are subject to
special requirements for disposal.
The refrigerant in use is a safety refrigerant. This means
that, should damage occur, the quantities released will
not cause injury to the respiratory systems of people
and animals.
Important information about recycling!
Environment and
Recycling
G
Do not touch the liquid refrigerant as it can freeze the
skin!