REMKO RKV 13 C - Manual (Page 4)

4
Safety Hints
Extensive tests have been conducted on the material,
functionality and quality of these units before they were
shipped.
These units may only be used in accordance with their
intended purpose. Hazards may arise if the units are
used improperly.
Please make sure to follow these safety instructions:
à The indoor unit is not suitable for outside operation.
à Make sure that personnel trained in the operation of
the air conditioner checks the unit for visible defects
on the operating and safety mechanisms each time
before putting it into operation!
à Before performing any work on the unit, the power
cord must be unplugged and the unit secured
against being switched on by unauthorised persons.
à Operate the unit only when assembled and for its in-
tended purpose.
à Keep in mind that it is not permitted to remove cov-
ers protective grilles, etc., during operation; this can
lead to uncontrolled operating situations.
à Operate the unit exclusively within the permissible
operating ranges (surrounding temperatures).
à Make sure that the unit is kept at a safe distance
from flammable objects.
à Do not install the air-conditioning unit close to heat-
ers.
à Ensure that the air intake and outlet openings are not
blocked and always clear of foreign objects.
à The unit may only be connected to a correctly in-
stalled and grounded power supply.
à Never operate or use the unit in rooms susceptible to
explosions.
à The unit is also not suitable for operation in rooms
containing large amounts of dust or aggressive air.
à Do not use flammable sprays such as hair spray or
spray paint in the direct vicinity of the unit.
à Do not operate the unit if the atmosphere is contami-
nated by oil, sulfur or salt.
à Do not expose the unit to a direct stream of water.
à Protect the indoor unit and the remote control from
moisture.
à Protect all electric cables and connection lines from
being damaged, for example, by animals.
à Protect the air-conditioning unit and the remote con-
trol from direct and indirect sunlight.
à Never open the unit housing! This may cause an
electric shock.
à Regularly check that condensation is not blocked
from flowing out of the unit.
Description of Device
The way the air conditioning system works is quite sim-
ple: warmth is removed from the room to be cooled.
The environmentally-friendly refrigerant R 407C trans-
ports this warmth just as it does for all other REMKO
air-conditioning products.
The unit’s primary function is to air-condition rooms.
It also filters and dehumidifies the air, thus creating a
comfortable climate in the room.
The unit also has a pure ventilation and dehumidifica-
tion mode.
The unit operates fully-automatically and offers a range
of other options thanks to its microprocessor control.
It is operated using the supplied infrared remote control.
Transport
and Packaging
The unit is shipped in a stable transport box made of
cardboard. Please examine the unit when it is delivered.
Make a note of any damage or missing parts on the
shipping bill and notify the shipping company and your
contract partner.
We do not assume any liability for subsequent com-
plaints.
à Never operate the unit without an air filter.
à Optimum unit function is only guaranteed at indoor
temperatures of between 17 and 32 °C.
à The unit is equipped with a safety mechanism which
prevents the condenser from being damaged caused
by the unit switching back on right away after it has
been switched off. It is only possible to restart after 3
minutes.
à Cleaning and minor maintenance work made only be
performed by the operator or an authorised person
designated by him in accordance with the instruc-
tions contained in the section "Maintenance and
Service.
à Do not expose the remote control to strong vibra-
tions.