REMKO RKL 220 - Manual (Page 4)

4
Safety Instructions
Extensive tests have been conducted on the material,
functionality and quality of the REMKO portable air con-
ditioner to ensure that it is a high-performance unit with
a long service life.
Hazards may nevertheless arise if the unit is used by
persons not familiar with its operation or if the unit is not
used for its intended purpose.
Please also make sure to follow these safety instruc-
tions.
Ensure that the unit is set up at a safe
distance from flammable materials.
Do not use the unit if it is lying on its
side or in any manner deviating from
these instructions.
Ensure that the air intake and outlet
openings are always clear of foreign
objects.
Do not insert any foreign objects into
the air intake or outlet openings.
Do not set the unit up near curtains
or drapes.
Maintain a safety zone of at least 50
cm around the unit.
min. 50 cm
Ensure that the air conditioner is se-
curely placed on a level surface.
The unit may only be operated in an
upright position.
Do not place any heavy or warm ob-
jects on top of the unit.
◊ Do not set up or operate the unit in rooms containing
explosion hazards.
◊ Do not set up or operate the unit if the atmosphere is
contaminated by oil, sulfur or salt.
◊ Do not expose the unit to direct streams of water.
◊ Protect all cables from damage.
◊
Make sure that all extension cables are suitable in
terms of capacity, length and intended use.
This unit may only be connected to a
correctly installed, grounded and
fused plug socket.
230V / 50 Hz; 10A fuse.
Do not move the unit while in opera-
tion. Wait at least five minutes before
starting the unit after it has been
moved.
This may result in damage to the com-
pressor.
5 MIN.
Do not pull on the power cable or
bend it excessively.
This may result in damage to the
cable.
When unplugging the unit, always pull
the power plug. Never pull the cable.
Switch the unit off by pressing the ON/
OFF button.
Do not switch the unit off by unplug-
ging the power cable.
Empty the water tank before moving the
unit.
230V 10A
To ensure that the unit operates effec-
tively, place the flexible exhaust hose
at an upwards incline and do not bend
it too sharply.
When the unit is in operation, do not switch it off
directly at the power supply by unplugging it as
this may damage the control circuit and invalidate
the warranty. Always switch the unit on and off at
the control panel.