REMKO PWL 101 HK - Manual (Page 5)

5
■ The units must only be operated
in a completely assembled and
mounted condition.
■ The units must only be opera-
ted within the specified capacity
limits and with the approved
operating media.
■ Safeguards, e.g. barriers must
not be removed or rendered
inoperational.
■ The units must only be operated
within the specified capacity
limits and with the approved
operating media.
■ The air intake grilles must
always be kept free of dirt and
loose objects and the air outlet
must not be closed.
■ Never insert foreign objects into
the unit.
■ The units must not be exposed
to a direct jet of water.
■ Do not operate the units in wet
areas with high humidity (e.g.
car wash).
■ All electric cables of the units
must be protected against da-
mage e.g. animals, etc.
Unit description
These units are stationary, indirect-
ly recirculated air cooling/heating
units with copper/aluminium fin
heat exchangers for connection to
a pumped cold/ hot water system
up to max. 90°C.
The units are in an exclusive de-
sign, compact, universal and are
easy to install and service.
NOTE
Perfect functioning of the units
is only ensured when the flow
temperature at the unit inlet
and the pump capacity cor-
respond to the selected unit
classification.
The inner supporting unit con-
struction is made of galvanised
sheet steel.
The heat exchangers have copper
tubes with aluminium fins.
For removal of the produced
condensate in cooling operation,
a ready to connect condensate
pump is provided.
For an optimal air flow, individually
adjustable louvres are provided at
the top of the housing and fully
adjustable louvre segments are
provided at the bottom.
The air discharge direction (hori-
zontal or vertical) can be individu-
ally adjusted to suit the local requi-
rements by changing the direction
of rotation of the fan.
The plastic housing can be deta-
ched completely from the sup-
porting lower housing part by
removing the securing clip. The
integrated securing strips prevent
the cover from falling.
The plastic housing of the units is
made of self-extinguishing material
(fire class V-0).
The heaters comply with the basic
health and safety requirements of
the pertinent EU regulations and
are easy to operate.
The units are suitable for heating/
cooling rooms with high or low
ceilings and where special impor-
tance is attached to exclusivity.
For example in large rooms such
as:
■ Exhibition halls
■ Sales rooms
■ Shopping centres
■ Business premises
■ Warehouses
■ Production halls
■ Foremen’s offices
■ Large entrance areas
The units must be mounted hori-
zontally on ceilings or roof struc-
tures.
The units are fitted with an aero-
dynamic, powerful two-speed axial
flow fan with 400V/50Hz external
rotor motor as standard.
Help save on energy consump-
tion in stand-by mode! If the
device, system or component
is not in use, we recommend
disconnecting the power sup-
ply. Components with a safety
function is excluded from our
recommendation!
TIP