beautypg.com

Protech Audio 5044 User Manual

Protech, Features

background image

Protech Audio Corporation PO Box 597, 192 Cedar River Road Indian Lake New York 12842 Voice 518-648-6410 Fax 518-648-6395

PROTECH

®

MODEL 5044

INSTALLATION & OPERATION MANUAL

MATRIX MIXER

1/08

- Page 4 -

The Model 5044 Matrix Mixer is designed to
provide the system designer, and audio contractor,
with a matrix mixer that provides adjustable output
levels for each line level input signal to each output.
The 5044 will accomodate up to 4 inputs and
provides 4 separate outputs each with it's own
custom signal mix.
Each input is balanced bridging transformer iso-
lated. Each output is low impedance transformer
isolated capable of driving loads as low as 600
ohms.
Each input level is adjustable from off to +25dBv to
each output, relative to the input signal level. Ad-
justment of an input level to any output will not effect
levels adjusted to other outputs.
Each output contains an externally controlled mute
switch for each input signal to allow mixes to be
changed from other control devices.
Typical mixes can include any or all input signals.

The Model 5044 can also be used as a 4 channel line
amplifier.
Actual installations include such facilities as factories,
convention centers, racetracks, arenas, corporate
communication centers, airports, mass transit sys-
tems, and broadcast centers.
Every circuit in the Toolbox Series has been meticu-
lously engineered, to achieve maximum reliability.
The power supply section of all Tool Box Series
audio devices, incorporates a UL recognized power
transformer. By mounting the AC power transformer
outside of the audio chassis, the Toolbox Series
audio devices achieve the lowest possible hum speci-
fication. Fusing is accomplished thru the use of a
standard, easily available 3AG size Slo-Blo fuse,
with the fuseholder mounted on the rear of the
chassis. A ground lift switch is mounted on the rear
of the chassis, to provide additional installation flex-
ibility.

FEATURES

Transformer Balanced Inputs.

Transformer Balanced Outputs.

www.

protechaudio

.com

Adjustable Mixing Level(s).

Individual Mutes For Each Output

Switchable 10dB Pad and 10dB Gain Setting

External UL Listed Power Transformer For Lowest Possible Noise.

Slide switch
Input 1

Pad Out
Pad In (-10dB)

RED
Push-On
Jumper
Input 1

Slide switch
Input 2

Pad Out
Pad In (-10dB)

RED
Push-On
Jumper
Input 2

Slide switch
Input 3

Pad Out
Pad In (-10dB)

RED
Push-On
Jumper
Input 3

Slide switch
Input 4

Pad Out
Pad In (-10dB)

RED
Push-On
Jumper
Input 4

Power
Supply
section

Top View With Cover Removed

Notes:

Location of pad slide switches and RED push-on gain jumpers.