Posiflex LM-2212X - Manual (Page 9)

9. Tilt the monitor in the direction
shown by the arrow in the figure.
Please do not press on the LCD
panel while setting up the tilt angle.
Connecting the VGA cable
Follow the below instructions to connect LM-2212X/2312X/2412X to the
terminals with the VGA cable.
1. After LM-2212X/2312X/2412X is
well installed to your terminals, tilt
the monitor up
and then position the
terminal with its screen facing
downwards to find the VGA port of
LM-2212X/2312X/2412X at the
bottom I/O plate.
2. Take the VGA cable out of the
package. Align one end of the VGA
cable with the VGA port at the
bottom I/O plate of your monitor.
3. Make sure the VGA cable is well
secured to the VGA port of the
monitor.
9