Posiflex LM-2212X - Manual (Page 12)

Powering ON/OFF LM-2212X/2312X/2412X
Instead of using an external power supply, LM-2212X/2312X/2412X greatly
depends on Posiflex POS terminals as primary power sources. In such a case,
the LCD monitor will be automatically initiated when the terminal is powered
up and shut down immediately after you power the POS down.
If LM-2212X/2312X/2412X does not work as expected, please make sure that
you properly change BIOD settings as specified in Activating Power Output
to LM-2x12X via POS System BIOS section.
Power ON the LM-2212X/2312X/2412X
Press the power button of the Posiflex terminal to power on
LM-2212X/2312X/2412X.
Power OFF the LM-2212X/2312X/2412X
To power off LM-2212X/2312X/2412X, press the power button of the POS.
Status LED Indicator
LED status indicators, which are located at the bottom of the screen, are
designed to notify users of the current status of your monitor by emitting
various LED signals. Please refer to the below chart to accurately interpret the
status indicators to facilitate your troubleshooting.
LED Status Description
POWER LED ON, solid green System Standby
ON, solid blue System power ON
OFF System power OFF
12