Posiflex LM-2212X - Manual (Page 7)

9.
Tilt the monitor in the direction
shown by the arrow in the figure.
Please do not press on the LCD
panel while setting up the tilt angle.
Mounting LM-2412X onto KS-7212X terminal
1. Position your terminal with its rear
facing towards you.
2. Take L type mounting bracket out of
LM-2412X box package. Align the
four screw holes of the mounting
bracket with the hole pattern at the
back of the terminal.
3. Insert four #6-32-12L fixing screws
into the screw holes and then tighten
the screws to secure the mounting
bracket.
7