Posiflex MS-5145 - Manual (Page 20)

20
３ １１６６００
Disable Tab Suffix
Additional Decode Features
Minimum Symbol Length – Single-line default is 3 digit,
Combine this code with the proper code bytes (on page
16–1), to specify the minimum number of characters in all
non-UPC/EAN bar codes.
３ ９０１８００
Symbol Length Lock – Combine this code with the proper
code bytes, to lock the bar code’s length into place.
３ ９０１9００
The features that use this code byte for Configuration require
that the scanner be in configuration mode. The Enter/Exit
Configuration Mode bar code must be scanned before
starting the configuration cycle.
Example:User configurable Minimum Characters can then
be saved in to the scanner by scanning the appropriate
code byte character barcodes.
To Program Minimum Symbol Length to one
1. Enter/Exit Configuration Mode (3 beeps)
2. Configurable Prefix (1 beep)
3. Code Byte 0 (1 beep)
4. Code Byte 1 (2 beeps)
5. Enter/Exit Configuration Mode (3 beeps
Code Bytes 0–9
3 1 1 6 6 0 0
3 9 0 1 8 0 0
3 9 0 1 9 0 0
3 0
３ ０
Code Byte 0
3 1
３ １
Code Byte 1