Posiflex MS-5145 - Manual (Page 18)

18
Patents
This Honeywell product may be covered by, but not limited
to, one or more of the following US Patents:
U.S. Patent No.;
5,216,232; 5,260,553; 5,340,971; 5,424,525; 5,484,992;
5,525,789; 5,528,024; 5,616,908; 5,627,359; 5,661,292;
5,777,315; 5,789,730; 5,789,731; 5,811,780; 5,828,048;
5,925,870; 6,029,894; 6,209,789; 6,227,450; 6,283,375;
6,347,743;
6,607,133; 6,619,549; 6,874,689; 6,975,456; 6,976,632;
7,017,813; 7,044,383;
7,124,950; 7,156,310;
No license, right or sublicense is granted, either expressly or
by implication, estoppel, or otherwise, under any Metrologic,
Honeywell or third party intellectual property rights (whether
or not such third party rights are licensed to Metrologic
and/or Honeywell), including any third party patent listed
above, except for an implied license only for the normal
intended use of the specific equipment, circuits, and devices
represented by or contained in the products that are
physically transferred to the user, and only to the extent of
those license rights and subject to any conditions, covenants
and restrictions therein.
Other worldwide patents pending.
All features can be enabled or disabled using the Multi-Code
Method.
A feature marked with a tilde ( ~ ) requires the Multi-Code
Method.
1. Power-up the scanner.
2. Scan the enter/exit configuration mode bar code (3
beeps)
3. Scan the bar code for the desired feature (1 beep).
Multiple features can be enabled/disabled before
scanning the enter/exit configuration mode bar code.
4. Scan the enter/exit configuration mode bar code (3
beeps) and save the new configuration. To abort a
configuration change, power off the scanner before
scanning the enter/exit code.