Posiflex KB-4000 - Manual (Page 8)

Part 8
the selected key. To program the rest groups, please click the right button of
mouse in the editing area and select from the pop-up menu. Please note that for
KP-100U/ KP-110U, the “ Multi-Shift” and “Separator” are not applicable.
Hardware Limitation in Programming
In case of “multiple combination key” application which means pressing
three or more keys at the same time to obtain certain data output from the
keyboard, there could be some limitations inherent from the nature of
keyboard structure. The CPU of keyboard detects the contact between the
“horizontal” and “vertical” lines for each key press, recognizes which key is
pressed and sends correspondent data to the host computer. When there are
many keys pressed at the same time, and the pattern of the contacts coincides
with some special relationship, there are chances that the CPU of keyboard be
confused about exactly which keys are pressed. The system integrator may
change the locations of the key-definition to prevent this once such confusion
happens.
MSR CONFIGURATION
Please find the subfolder “\Drivers\KP\KBMSR” in the Posiflex Product
Information CD or download from our web as mentioned earlier for the ISO
MSR option in KB-4000 / KP-100 and go to either the subfolder “DOS” for
the MSR manager under MS-DOS or the other subfolder “MSR_xxx” for
setting up the MSR manager under Windows OS. Please find the subfolder
“\Drivers\KP\USBMSR_xxx” in the CD or download from our web as
mentioned earlier for the ISO MSR option in SD-100 / KP-100U / KP-110U
and execute the “SETUP.EXE” for setting up the MSR manager under
Windows OS. The MSR manager can control parameters like individual track
enable/disable, Alt+Num emulation and Start/end sentinel substitute.
SMART CARD READER DRIVER INSTALLATION
This driver should be installed in the system prior to the system
detection of the new hardware. Therefore, the USB connection of KB-4000 /
KP-100/ KP-100U/ KP-110/ KP-110U/ SD-100/ SD-110 could have to be
disconnected before driver installation and then connect it back afterwards.
Please find the subfolder “\Drivers\KP\SC200” in the Posiflex Product
Information CD or download from our web as mentioned earlier. Execute the
“SETUP.EXE” to install the driver into the Windows OS. Please note that the
driver must be installed from the subfolder “SC200” within subfolder
“\Drivers\KP\”. The subfolders like “SC100” or “FingerPrint” are not
applicable to the latest generation of these security devices. The reader is
PC/SC 1.0 compliant. The reader is also EMV level 1 compliant. The smart
card reader is also supported by Microsoft CCID generic class driver.