Posiflex KB-4000 - Manual (Page 10)

Part 10
Numerical Keypad
The numerical keypad is durably pre-marked. The numerical keypad is
not applicable in combination keys.
DOS Application Notice for KP-100U / KP-110U
The keypad KP-100U/ KP-110U connects to the host through USB port
working as a USB KB and therefore also requires no driver installation except
setting up the USB keyboard to be enabled in system BIOS CMOS setup.
This setup is particularly important for application of the USB KB device to
operate under DOS environment. Please note that the KP-100U / KP-110U
delivered particularly for DOS environment application is different from that
for Windows environment by internal jumper setting or circuitry and therefore
they are not freely interchangeable for end users.
IBUTTON RECEPTOR (SD-100/SD-110 only)
The iButton option can be programmed to communicate on either RS232
interface or PS/2 KB interface through Hyper Terminal configuration setup.
Please refer to instruction on our web site for the detail. In general, this should
be taken care of by the software in the way organized by the system integrator.
Each iButton receptor is delivered with 2 iButton keys attached. Each
iButton key carries unique ID. Please approach your dealer for any additional
iButton key required.
警告使用者
這是甲類的資訊產品，在居住的環
境 中 使 用 時 ， 可 能 會 造 成 射 頻 干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454