Posiflex JIVA XP-3208 - Manual (Page 20)

Page 19
Please notice that if the XP system is improperly turned off before a complete
boot up procedure, the above preset power on control functions will be
disabled until next turning off after a complete boot up.
Storage Device
The standard system storage device is 2.5” SATA HDD in the main unit. This
device can be replaced with an option SATA SSD HDD.
TECHNICAL MANEUVERS
Some technical maneuver in XP-3000/3300 series such as serial COM port
+5V/+12V power supply settings is not supported for COM1, only 5V for
COM4 in system jumper setting and printer parameter setting. However, such
support is limited to the application of specific Posiflex peripherals and must
be disabled when the Posiflex peripherals are disconnected.
Failure to follow
the discipline would result in electric or fire hazard and such
consequences are not covered by product warranty!
The rest applicable technical maneuvers include system CMOS data reset,
system reset, DRAM upgrades and installation of optional SATA SSD.
All
these technical maneuver operations require purchase of applicable Technical
Manual from Posiflex or consultation from Posiflex authorized dealers and
should be handled only by a qualified technician.
警告使用者 警告使用者 警告使用者 警告使用者
這是甲類的資訊產品，在居住的環
境 中使 用 時 ， 可 能會 造 成 射 頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454