Posiflex JIVA XP-3208 - Manual (Page 13)

Page 12
UPS Battery (Option)
CAUTION: Please notice that to connect the UPS battery only before
power up the system or when system is switch off. Always
disconnect the UPS battery when the system is to be left
powered off for more than few days.
When the XP-3000/3300 system is ordered with the
UPS battery, the UPS battery is in the carton at delivery.
Please release the compression lock of bottom plate and
open the bottom plate as picture at right. Next, please
unfasten these two screws which fasten the UPS bracket
and take out the bracket as shown in the lower left
picture.
Please take it out and place it in the battery compartment at centre lower part
of the bottom area as arrowed in the picture at bottom centre. Passing the cable
through the groove and connect the cable to its connector in the main
connection area which shown in the picture at bottom centre. Assemble the
bracket after plug the connector and cover the bottom plate.
Please pay particular attention to the environment requirement for UPS
battery in following chapter “APPLICATION ENVIRONMENT”.
PUSH PUSH