Posiflex JIVA XP-3208 - Manual (Page 14)

Page 13
I/O Plate
Please follow steps A to C sequentially with reference to pictures to use the
I/O Plate.
Step A: Please hold the LCD panel and push lock/release lever for tilt angle
adjust backward.
Step B: Turn the panel backward to most horizontal position
Step C: Please hold the base and pull up the terminal carefully than you will
see the I/O plate.
I/O Plate View:
A: 2x Serial Port (RS-232) COM1&2.
B: 1x Serial Port (RJ-45) COM3.
C: 1x LAN Port.
D: 4x USB Ports.
E: 1x CR Ports.
F: 1x VGA Port (D-sub, 15 PIN).
G: DC Power connecter.
H: UPS Connector.
In XP-3000/3300 system, COM2 and 3 can supply a +5 V DC through system
BIOS setting and +12V through jumper setting. The VGA port can delivery
+12 V power through system BIOS setting for Posiflex LCD display monitor.
I/O
B
A
C
A B
C D E F G H