Posiflex JIVA XP-3208 - Manual (Page 12)

Page 11
highest priority of printer setup mode. For the setup priority of printer,
whatever hardware switch or software setting can be choose by software.
CAUTION: On doing any function’s modification of switches, please
contact authorized dealer or technicians. Failure to do this
could make the printer malfunction.
Paper Jam Problems
When Paper is jammed inside the printer – Push down the hood release
button then the printer cover can be released. Remove the jammed paper and
reinstall the paper roll. Close the hood properly and firmly for operation.
Magnetic Stripe Reader (Option)
For magnetic stripe card reading, please insert the
card to the bottom and magnetic stripe facing the
marked aside of slot. In spite of the card’s movement
can be two-way of the slot, the reading process should
be passing through whole slot horizontally. A non-
standard card recorded without complete degaussing
prior to recovery may accept only one direction in
card reading.
The MSR in XP-3000/3300 series reads the ISO or JIS-II magnetic stripe card
without driver. Yet, there is a “Posiflex USB
MSR Manager” program provided to control
some parameter configuration for ISO MSR.
The controllable features in this program
covered: each track enable/disable, Alt+Num
approach for ASCII codes and Leading/Stop
code enable/disable. The function for enabling
each track comes in effect only when the track is physically available. Please
find
in the Product Information CD delivered with system
“\Drivers\SD_Series\USBMSR_xxx” and “Set Up” this manager program or
download
the installation program from our official website
http://www.posiflex.com or http://www.posiflex.com.tw.