Posiflex JIVA XT-3015 - Manual (Page 9)

Part 9
a)
DDR3 SODIMM memory expansions up to 4GB max in one SO-
DIMM.
b)
Integrated side mount upgrade kit:
SA-105Z: with optional MSR; Wi-Fi
SA-205Z: iButton
SA-305Z: 3 track MSR, RFID and Finger Print Sensor
SA-405Z: 3G, MSR and Finger Print Sensor
c)
Preload POSReady7 /POSReady2009/ Win 7 / Windows Embedded
8.1 Industry/ Linux by request.
d) Parallel extension cable and 2
nd
HDD kit.
e) Wireless LAN.
f) RJ50 to DB9 serial port conversion cable/parallel cable.
g) Split cable for 2 cash drawer control.
h) WB-5000 wall mount bracket.
INSTALLATION GUIDES
CAUTION: Before any installation or cable connection to the set, please
always make certain that the system is turned off and the
external power source to the set is removed to prevent electric
hazard! Never touch any metal pin in the connectors or
circuits to avoid high voltage hazard or electrostatic
discharge damage unless the operator is well grounded.
Failure to do the above will void the product warranty!
CABLE ROUTING AND CABLE PASSAGE FROM
BOTTOM For Gen 7/7E/8/8E Base
Note: Please ensure that the touch panel is tilted horizontally against the base
stand then removing the I/O cable cover. After removal of the I/O cable
cover, the connector area will be accessible then.
1)
Please follow steps sequentially with reference to pictures below to route
thru cable passage from bottom for Gen 7/8/7E/8E models.
Step A: Release the indicated base cover.