Posiflex JIVA XT-3015 - Manual (Page 18)

Part 18
SERIAL PORTS – COM1/2/3/4
In XT-3015/3215/3215I system, there are 3 serial ports in form of DB 9 pin
male connectors and 1 in form of 10 pin RJ50 type modular connector
available. In XT-3017 system, there are 4 serial ports in form of DB9 pin male
connectors available. DB 9 serial ports can supply a +5 V and +12V DC after
proper BIOS and jumper setup. However, do not connect any other device to
this port before the power in this port is disabled.
PARALLEL PORT
In XT-3015/3017/3215/3215I system, the parallel port can be available only
through use of the optional conversion cable. It should be connected to the
special connector inside the service window as described earlier. The other end
of the cable is the normal 25 pin D sub female LPT connector.
TOUCH PANEL
All paragraphs below are applicable for models with touch panel only. The
user of those models without touch panel can ignore them and consider this
user’s manual ends here.
Touch Manager
Touch Terminal Manager for each type of touchscreen is available for user to
set up touchscreen functions. If your system is preloaded with the OS of your
choice, the chances are the Manager is already installed on your system.
Nevertheless, you can also download the Manager from our website:
XT-3215 is a registered Energy Star model.