Pennco 3KW0.60 - Manual (Page 23)

23
THERMOSTAT LOCATIONS TO AVOID
DEAD
SPOTS
HOT SPOTS COLD SPOTS
Behind
doors
Concealed pipes Concealed pipes
or ducts
Fireplace
TV sets
Stairwells
drafts
Corners &
alcoves
Radios Doors drafts
Lamps
Unheated room
on other side of
wall
Direct sunlight
Kitchens
CHECKING AND ADJUSTING CONTROLS
VERIFY THERMOSTAT OPERATION: Thermostat location
has important effect on operation of boiler system. Follow
instructions included with your thermostat. Thermostat is
located typically about five feet above floor on inside wall.
Locate thermostat to sense average room temperature, so
avoid the following:
When temperature on thermostat is set above indicated
thermostat temperature, boiler’s burner should start.
Verify that once room temperature reaches selected
temperature setting, boiler’s burner shuts off, and once
room temperature falls few degrees boiler starts operating
again. Do not start burner unless all cleanout doors
are secured in place.