OWON AG (-F) Series - Manual (Page 23)

5.Front Panel Operation
18
Setting menu
of Noise signal
Amplitude
Load
Offset
Current signal
Channel
Parameter 2 Parameter 3
Noise waveform
Figure 5-10: The User Interface of Noise Signal
To Output Arbitrary Signals
Press button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to To
Output Sine Signals on page 12.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Channel
Setting menu of
Arbitrary signal
Amplitude
Load
Offset
Current signal
Frequency
Parameter 1
Parameter 2 Parameter 3
Built-in Exponential
Rise Waveform
Figure 5-11: The User Interface of Arbitrary Signal