OWON ODP3031 - Manual (Page 23)

5.Front Panel Operation
18
(2) Press the key to start recording. During recording, an icon is shown on the
status bar.
(3) Press the Record key again to stop recording.
5.6 System Settings
You can set the system by operating the System Menu. It is suggested that you should read
the "System Menu Operation" on P11 first, so as to be familiar with the menu operation.
5.6.1 Set Language
Press the System key and enter [Language]; choose the desired language. The supported
languages include: Chinese, English and so on.
5.6.2 Set Bright
Press the System key and enter [Display
→Bright]. Press the ＜ / ＞ key or turn the
knob to adjust the screen brightness (1~10).
5.6.3 Set Screen Saver Time
The screen saver will run automatically if no operation is taken for any key within the set
time. Press any key to resume.
Press the System key and enter [Display
→ScrSaver]. Press the ＜ / ＞ key or turn
the knob to adjust the screen saver time (1~99 minutes). When it is set to "00", the screen
saver is disabled.
5.6.4 Set System Time
Press the System key and enter [Sys Set
→SysTime]. Press the ▲ / ▼ key or turn the
knob to set the selected value. Press the ＜ / ＞ key to move the cursor. Press the
key to confirm.
5.6.5 Buzzer
Press the System key and enter [Sys Set
→Buzzer]. Press the
key to turn on/off the
buzzer. When the buzzer is on, an icon will be shown on the status bar. You will hear
a key tone once a key is pressed down; when the system prompts the instrument will make
a buzzing sound, e.g. cutting off the output due to O.V.P/O.C.P. When the buzzer is off,
an icon will be shown on the status bar.
5.6.6 Short Circuit Protection
Press the System key and enter [Sys Set
→ShortCurPro]. Press the
key to
check/uncheck it. If you check it, when short circuit occurs, the instrument will cut off the
output; uncheck it to still output.