Osburn OB01111 - Manual (Page 18)

•
The connector must not pass through any combustible material, nor may it pass
through a concealed space (such as an attic, roof space, or c
a wall, ceiling, or into a masonry chimney, use either chimney components listed for
that specific use, or means acceptable to local authorities having jurisdiction over the
installation.
•
Installation of a "barometric draft stabi
recommended.
FIGURE 2.3 (A) Connecting Sections
FIGURE 2.3 (B) Minimum Slope
The connector must not pass through any combustible material, nor may it pass
through a concealed space (such as an attic, roof space, or closet). If passing through
a wall, ceiling, or into a masonry chimney, use either chimney components listed for
that specific use, or means acceptable to local authorities having jurisdiction over the
Installation of a "barometric draft stabiliser" (fireplace register) on a connector is not
FIGURE 2.3 (A) Connecting Sections
FIGURE 2.3 (B) Minimum Slope
18
The connector must not pass through any combustible material, nor may it pass
loset). If passing through
a wall, ceiling, or into a masonry chimney, use either chimney components listed for
that specific use, or means acceptable to local authorities having jurisdiction over the
liser" (fireplace register) on a connector is not