Orion System Dual Electronic Expansion Valve Module - Manual (Page 15)

Technical Guide
Dual Electronic Expansion Valve Module
15
Force Valves Screens
Force Valves Screens
Refer to the following map when navigating through the Force Valves
Screens. From the FORCE VALVE Screen, press
. At the
FORCE MODE ON/OFF screens, press the
arrow key to turn
the valve on and press the
arrow key to turn the valve off.
Use the
and arrow keys to increase and decrease
the percentage.
FORCE
VALVES
FRC V-A
MODE ON/OFF
FRC V-B
MODE ON/OFF
FRC V-A
%
FRC V-B
%
FORCE
TIMEOUT
FORCE VALVE PERCENTAGE
If Force Valve A is enabled, you can manually
adjust the valve position.
This screen will appear when the
Force Mode times out after 1 hour.
Press the
button to turn the valve on.
Press the
button to turn the valve off
Force Valve will timeout after 1 hour
if not manually turned off.
Press the
button to increase the
percentage. Press the
button to
decrease the percentage.
NOTE: When you turn the Force Valve back
off or after 1 hour has elapsed, the valve will
reinitialize to zero.
FORCE MODE TIME OUT
Press the
button to turn the valve
on. Press the
button to turn
the valve off.
Force Valve will timeout after 1 hour
if not manually turned off.
FORCE VALVE PERCENTAGE
If Force Valve B is enabled, you can manually
adjust the valve position.
Press the
button to increase the
percentage. Press the
button to
decrease the percentage.
NOTE: When you turn the Force Valve back
off or after 1 hour has elapsed, the valve will
reinitialize to zero.