Orion System PT-Link-LON - Manual (Page 6)

PT-Link-LON ® Technical Guide
PT-Link Interface 6
Confi guring the PT-Link Controller
Figure 5: Network Connections Window
Figure 6: Local Area Connection Status Window
Figure 7: Local Area Connection Properties Window
Figure 8: Internet Protocol Properties Window
Computer IP Address Set-up for Windows
NT or XP
1.) Click
; then
click
.
2.) Double-click on the Network Connections icon.
The Network Connections Window will appear.
NOTE: If any wireless connections are listed, disable them
by right-clicking the connection and selecting
.
3.) In the Network Connections window, select the Local
Area Connections entry. The Local Area Connection Status
Window will appear.
4.) Click
in the lower left of the window.
The Local Area Connection Properties window will appear.
5). In the Connection Items list box, be sure the Internet
Protocol (TCP/IP) is checked. Select the Internet Protocol
(TCP/IP) item to highlight it and then
click
.
The Internet Protocol Properties window will appear.
6). Type in the following information:
a.) IP address 192.168.1.5
b.) Subnet mask 255.255.255.0
c.) Default Gateway is blank
7.) Select
until all of the above network confi guration
windows are closed. You may have to reboot the computer
before the new values are valid.