OpenEye GraniteRack 1U - Manual (Page 18)

10 28079AB
TURNING ON THE 1U
1. Connect all cables including the SCSI Cable and the Power Cable.
2. Plug the connected power cable into an outlet.
3. Flip the Power Switch to the ON position, starting the unit
4. If daisy chaining multiple 1U units -- power the first unit in the chain on and wait 10 sec. before powering on each unit after the
previous unit has completed booting.
TURNING OFF THE 1U
1. Flip the Power Switch to the OFF position, turning off the unit
MULTIPLE SCSI FORMAT SUPPORT
The subsystem supports the SCSI interface standards listed below.
NOTE: Data bit and cable length restrictions must be followed.
SCSI Type Data Bit Data Rate Cable Length
SCSI-1 8 Bits 5 MB/Sec 6 m
Fast SCSI 8 Bits 10 MB/Sec 3 m
Fast Wide SCSI 16 Bits 20 MB/Sec 3 m
Ultra SCSI 8 Bits 20 MB/Sec 1.5 m
Ultra Wide SCSI 16 Bits 40 MB/Sec 1.5 m
Ultra 2 SCSI 8 Bits 40 MB/Sec 12 m
Ultra 2 Wide SCSI 16 Bits 80 MB/Sec 12 m
Ultra 160 Wide LVD 16 Bits 160 MB/Sec 12 m
Ultra 320 LVD 16 Bits 320 MB/Sec 12 m