OpenEye EasyNVR - Manual (Page 63)

32896AC 63
The recorder has built-in web-based remote software that can be accessed if the recorder has a
network connection. This web-based remote software requires Microsoft® Internet Explorer®. The
EasyNVR also has mobile applications for iPhone, iPad, Android, and Android Tablet under the name
EasyMobile.
Note Mozilla ® Firefox ®, Google™ Chrome™, or Apple® Safari® cannot be used to connect to the
recorder. These browsers do not use ActiveX.
Configure the Recorder for Remote Access
Configure the recorder for DHCP or static IP address.
1. Connect a RJ45 Ethernet cable with an active network connection to the recorder.
2. Access the Setup menu and click System Setup then click Network Setup .
3. Click General Settings .
4. By default the DHCP function on your recorder is set to On , and the IP address will be displayed.
Make a note of this IP address.
5. Select a Web Port . By default this is port 80.
6. Close Setup .
1. Connect a RJ45 Ethernet cable with an active network connection to the recorder.
2. Access the Setup menu and click System Setup then click Network Setup .
3. Click General Settings .
4. Set DHCP to Off.
5. Type the IP address, Netmask , Gateway , and DNS for the network you will connect to into the
appropriate fields.
6. Select a Web Port . By default this is port 80.
7. Close Setup .