Onwa Marine Electronics KAP-866 - Manual (Page 31)

Cable to display unit
Fluxgate Sensor
Threaded tubes
(At least one meter length)
Rope
Fixed screw
Mast
Radar antenna
Wheelhouse
Fluxgate Sensor
3.3.3 Installation an outdoor magnetic sensor unit (KFG-28)
Outdoor installation
Keep the length of the cable in mind when selecting a mounting location.
It should be far away from their minimum 1 meters to prevent the influence
for iron and steel or other magnetic materials.
use not magnetic screws for fixed the unit.
Select the vertical way of positions for installation.
Please installed the magnetic sensor unit on the top of wheelhouse.
distortion can be minimized.
fluxgate sensor
Don't install it in a room so that the magnetic
26