Online power – OnLine Power Constant Power 3 User Manual
Page 11
OnLine Power
6002-034 REV. C
1-4
1-2
BENEFITS
The Constant Power 6, Constant Power 3, and Mini-Power voltage regulators protect electronic equipment from
over voltage conditions during line power surges and undervoltage conditions during sags. In addition, the units
protect equipment loads by attenuating transients present on utility power lines. Over voltage, overcurrent, and
transient conditions stress electronic components and decrease system reliability.
1-3
TRANSFORMER
The transformer contained in the unit is designed for convection cooling by means of free circulation of air through
the bottom, and sides of the unit. Maximum ambient temperatures should not exceed 104
F (40
C).
1-4
PRODUCT FEATURES
Sections 1-4 and 1-5 describe the features of the Constant Power 6, Constant Power 3, and Mini-Power. Some
features described in Section 1-4 are standard on all models while other features are offered as options. Refer to
Table 1-1 to determine if the features described in this section are applicable to your unit. Refer to Section 5.
Options for information on optional features.
TABLE 1-1
PRODUCT FEATURES
OPTIONS
CP6
CP3
MINI-
POWER
BYPASS SWITCH
S
S
S
MAIN INPUT CIRCUIT BREAKER
S
S
S
POWER ON INDICATORS
S
S
S
OUTPUT FILTER
S
S
S
INPUT POWER CORD (6 FEET)
S
S
S
CASTERS
S
N/A
N/A
K-FACTOR RATING
O
O
O
LOCKING INPUT PLUG
O
O
O
MATCHING INPUT RECEPTACLE
O
O
N/A
SPECIAL PAINT
O
O
O
REMOTE EMERGENCY POWER OFF STATION
WITH 50 FEET CABLE
O
N/A
N/A
THERMO REMOTE EMERGENCY POWER OFF
STATION WITH 50 FEET CABLE
O
N/A
N/A
MANUAL RESTART SHUNT-TRIP MAIN OUTPUT
CIRCUIT BREAKER WITH REPO PLUG
O
N/A
N/A
SHUNT-TRIP MAIN INPUT CIRCUIT BREAKER
WITH REPO PLUG
O
N/A
N/A
TABLE KEY: S = Standard equipment, O = Available as an option, N/A = Not available for this model.