ONICON System-30 MODBUS BTU - Manual (Page 18)

11451 South Belcher Road, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
System-30 BTU Measurement System MODBUS RTU RS485 04/14 - 0583-1 / 18345
Page 18
Single Mode Operation
SINGLE MODE BTU METERS – RUN MODE DISPLAY PAGES
PAGE No. DISPLAY NAME SELECTABLE UNITS
1 ENERGY TOTAL BTU, TONHR or KWHR
2 FLOW TOTAL GAL, LITER, METERS 3
3 ENERGY RATE BTU/HR, TONS, KW
4 FLOW RATE GPM, GPH, MGD, L/SEC, L/MIN, L/HR,
METERS
3 /HR
5 INTRN TEMPERATURE DEG F, DEG C
6 EXTRN TEMPERATURE DEG F, DEG C
7 Di3 PULSE TOTAL COUNTS or TEXT ENTRY
8 ALARM STATUS NOT APPLICABLE
9 SERIAL NUMBER NOT APPLICABLE
Dual Mode BTU Meters
DUAL MODE BTU METERS – RUN MODE DISPLAY PAGES
PAGE No. DISPLAY NAME SELECTABLE UNITS
1 MODE 1 ENERGY TOTAL BTU, TONHR or KWHR
2 MODE 1 FLOW TOTAL GAL, LITER, METERS 3
3 MODE 2 ENERGY TOTAL BTU, TONHR or KWHR
4 MODE 2 FLOW TOTAL GAL, LITER, METERS 3
5 ENERGY RATE BTU/HR, TONS or KW
6 FLOW RATE GPM, GPH, MGD, L/SEC, L/MIN, L/HR,
METERS
3 /HR
7 INTRN TEMPERATURE DEG F, DEG C
8 EXTRN TEMPERATURE DEG F, DEG C
9 Di3 PULSE TOTAL COUNTS or TEXT ENTRY
10 ALARM STATUS NOT APPLICABLE
11 SERIAL NUMBER NOT APPLICABLE
The operating mode, measurement units and multipliers are programmed into the Btu
meter at the factory. These settings may be re-programmed in the field. Please contact
ONICON technical support personnel for assistance, if changes are required.
4.3 DISPLAY AND PULSE OUTPUT UNITS AND MULTIPLIERS
The units and multipliers are programmed prior to delivery. Contact ONICON’s technical support
personnel for assistance in changing units or multipliers.