ONICON F-5100 Insertion - Manual (Page 9)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-5100 Insertion Thermal Mass Flow Meter Manual 05/15 - 0663-20 / 18333 Page 9
1.6 WORKING ENVIRONMENT
F-5000 series sensors are designed for installation and use in typical industrial environments that
are free of corrosive liquids and fumes, direct liquid exposure, heavy condensation, temperature
extremes and vibrations. Do not install the sensor in direct sunlight.
The operating ambient air temperature range is -5° to 150° F.
The electrical power should be relatively clean, free of high frequency noise, large voltage
transients, and protected from power surges and brown outs.
1.7 WARRANTY & SERIAL NUMBER
Warranty
ONICON provides a 2-year warranty for this product. Certain exclusions apply. Please
refer to Appendix A-6, ONICON’s Conditions of Sale for details.
Serial Number
The serial number of your F-5100 series flow sensor is located on the nameplate attached
to the top of the enclosure. This serial number will also be located on the remote sensor
for remote mount sensors.
IMPORTANT NOTE
ONICON F-5000 series flow sensors are individually calibrated. Remote mount electronics
enclosures and sensors must share the same serial number and must be installed together as a
system. Mixing components from different sensors will result in significant errors in calibration.
i