ONICON F-5100 Insertion - Manual (Page 21)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-5100 Insertion Thermal Mass Flow Meter Manual 05/15 - 0663-20 / 18333 Page 21
A B C
A B C
1
2
3
4
5
6
1
2
3
4
5
6
Control System
Analog / Pulse Inputs
F-5100 Terminals
Scaled Pulse Isolator
Pulse Input
Control System Enclosure
Scaled Pulse Isolator
Connection to F-5100
(Shown with Insertion Meter)
Non-polarized
Output
3.5.4 Using the Pulse Isolator Module
The Pluse Isolator Module is designed to be mounted inside the control system enclosure.
It converts to active DC pulse output from the flow sensor into an isolated dry contact
closure output. Using the pulse isolator does not change the pulse rate or duration.
Scaled Pulse Isolator
Connection to F-5100
(Shown with Insertion Sensor)
Control System Enclosure
F-5100 Terminals
Field Wiring