Olson Technology MUSCLE-EM55X - Manual (Page 42)

OTOT-EM55X/XL Optical Transmitter Rev. x1 www.olsontech.com
41
SNMP Configuration
A SNMP configuration menu is available as shown in the picture below:
Figure 32 — SNMP Configuration Menu
Traps
The SNMP configuration menu allows entering the IP trap receiver addresses for up to 4 trap receivers, and to change
the trap community strings for trap receiver #1 and trap receivers #2 to #4. Additionally all traps can be dis-
abled/enabled. Furthermore, the inventory traps might be disabled or enabled. A further button allows selecting the
SCTE HMS alarm generation:
• Disable all traps
• Enable all traps
Enable and resend all traps; this function is helpful for testing SNMP communication with the trap receiver(s)
Communities
Separate strings can be allocated to the get community and the set/get community.