Ethernet communication module dvpen01-sl, 1 introduction, 1 functions – Delta DVPEN01-SL User Manual
Page 5: 2 specifications
Ethernet Communication Module DVPEN01-SL
DVP-PLC Operation Manual
3
1 Introduction
Thank you for choosing DVPEN01-SL module. To correctly install and operate DVPEN01-SL, please read
the manual carefully before using the module.
DVPEN01-SL is an Ethernet communication module for remote setting and communication through
WPLSoft. DVPEN01-SL is able to send E-mails, automatically correct the RTC in DVP28SV11R/T and
exchange data. It supports Modbus TCP communication protocol and can conduct remote monitoring by using
SCADA (Supervisor Control and Data Acquisition) software or HMI (Human Machine Interfaces). DVPEN01-SL
can be the master of Modbus TCP, sending out Modbus TCP instructions and controlling the peripheral
equipment. In addition, under MDI/MDI-X auto-detection, it does not need to use a crossing cable. See the
contents below for more detailed instructions on DVPEN01-SL module.
1.1 Functions
z
Auto-detects 10/100Mbps transmission speed
z
MDI/MDI-X
auto-detection
z
Supports Modbus TCP protocol (at the same time supports Master and Slave mode)
z
Able to send out E-mails
z
Auto-corrects the RTC in PLC through the Internet time correction function
z
Supports point-to-point data exchange (Max. data exchange length: 200 bytes)
1.2 Specifications
Internet interface
Item
Specification
Interface RJ-45
with
Auto
MDI/MDIX
Number of ports
1 Port
Transmission method
IEEE802.3, IEEE802.3u
Transmission cable
Category 5e
Transmission speed
10/100 Mbps Auto-Detect
Network protocol
ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, Modbus TCP
Serial communication interface
Item
Specification
Interface RS-232
Number of ports
1 Port
Transmission cable
DVPACAB230, DVPACAB215, DVPACAB2A30, DVPACAB2B10
Environment
Item
Specification
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Environment
Operation: 0°C ~ 55°C (temperature), 50 ~ 95% (humidity), Pollution degree 2;